Fixed Solutions
Reusable Contamination Control Mats
Enhance Your Contamination Control Strategy
Your controlled environment faces thousands of contamination threats daily. Traditional barrier methods, such as peel-off sticky mats, often fall short when effectively addressing these challenges, and research has shown that 80% of contamination enters at floor level. Yet, businesses continue to rely on outdated contamination control measures that capture less than 30% of particles from foot and wheel traffic.
Dycem CleanZone is a scientifically proven reusable solution that attracts, captures, and retains up to 99.9% of foot and wheel-borne particles and up to 75% of airborne contamination, enhancing your contamination control efforts.
Where to Use Fixed Mats
Cleaning and Maintenance
01
Clean Dycem mats once per day, or after each shift in high-traffic areas, to ensure optimal performance. Always use a Dycem approved cleaning solution to maintain the mat’s effectiveness.
02
Using a spray bottle, mop, or pre-saturated wipe, apply the diluted cleaner to the entire mat ensuring complete coverage. For larger installations, complete all cleaning steps in sections.
03
Using a squeegee system, such as a Vikan, agitate the surface of the mat to lift the retained particulates.
04
Mats should be agitated in both a vertical and horizontal direction to ensure all contamination is lifted and removed. Start closest to the controlled area and work backwards.
05
Continue to agitate with the squeegee in a horizontal direction, starting closest to the controlled space and working outward.
06
Pull the dirty liquid to the edge of the mat surface using the squeegee. Collect with a sponge, mop, or cloth and dispose in accordance with facility mandated SOP's. For heavily saturated mats, repeat cleaning steps 1-6.
Customize Your Dycem Fixed Mats
Cobalt
Midnight
Titanium
Slate
Green
Red
Edging
Black
Red
Blue
Green
Yellow
Built to Last in Your Data Center
Engineered to help protect critical infrastructure from particulate contamination.
10⁸ Ohms
Static dissipative surface
Up to 99.9%
Floor-level contamination control
Up to 75%
Airborne contamination control
3-5 Years
Reusable product lifespan
Technical Performance
Aligned with Recognized Data Center Standards and Guidance
Dycem supports all three by controlling contamination at the floor, where much of it enters, helping reduce particulate transfer into controlled zones.
Dycem Lite
Low profile, reusable mats for fast deployment in high-traffic transition areas. Ideal for fit-out, construction, or temporary use in server rooms, data halls, and airlocks.
Floating Mat
Larger, freestanding mats for heavier foot and wheeled traffic. Best suited for data center corridors, communal entrances, storage, and maintenance areas where durability and consistency are needed.
Access Panels
Inlaid contamination control for raised floor systems, providing long term protection without disrupting access.
Get Started Quickly
Contact the Dycem team today.
When contamination control is critical, quality matters. Dycem solutions are manufactured under ISO 9001 and ISO 14001 certified processes to ensure consistent performance and long-term reliability. Compliance with REACH and California Proposition 65 reflects our commitment to quality, safety and environmental responsibility.
